Transfer Guidelines

Transfer Guidelines

Film Type Film Thickness Mircon (with Hot Melt) How To Print / Cut Temperature Press Time Peel Type
PU 42 (96) Cut the design in reverse 300F~320F 8 - 10 sec Cool peel
PU - Vent Hole 42 (96) 300F~320F 8 - 10 sec Cool peel
PVC (Normal) 110 (166) 300F~320F 8 - 10 sec Cool peel
PVC (Neon) 150 (200) 300F~320F 8 - 10 sec Cool peel
Glitter 264 (354) 300F~320F 8 - 10 sec Cool peel
Flock 500 (566) 300F~320F 8 - 10 sec Cool peel
Hologram 32 (82) 300F~320F 8 - 12 sec Warm peel
Metallic 32 (82) 300F~320F 10 - 12 sec Warm peel
Soft Metallic 30 (90) 300F~320F 10 - 12 sec Warm peel
Reflective 120 (180) 300F~320F 8 - 10 sec Cool peel
Foam PU 105 (160) 300F~320F 5 - 8 sec Warm peel
Glow in the dark 160 (210) 300F~320F 7 - 10 sec Cool peel
Printable - PU 30 (85) Direct print & cut on to the film 300F~320F 8 - 10 sec Cool peel
Printable - PU SB 40 (95) 300F~320F 8 - 10 sec Cool peel
Printable - PVC 85 (140) 300F~320F 8 - 10 sec Cool peel

 

*Pressing Tip*

Reflective Silver
(non-sticky pet)		 Please press reflective film on fabric just for 1 second and then remove the pet film.
After that, please press for 10 seconds directly on reflective vinyl applied fabric.
Soft Metallic After pressing soft metallic on fabric and then removing the pet film, please press directly on soft metallic applied fabric one more time. In this way, you will have a longer wash durability.

Washing Conditions